Xantrex XPower 1500W Modified Sine Wave Inverter with Remote
Xantrex XPower 1500W Modified Sine Wave Inverter with Remote
Run compatible 115-volt appliances, tools, and onboard electronics from a 12-volt battery system when shore power is unavailable. The Xantrex XPower 1500 provides 1,500 watts of continuous modified-sine-wave output, 3,000 watts of surge capacity, GFCI-protected receptacles, and an included remote on/off switch.
Key capabilities
- 1,500 W continuous output with 3,000 W surge capacity.
- One duplex GFCI receptacle for connecting compatible loads.
- Included remote on/off switch.
- Hardwire DC connection with heavy-duty stud terminals and mounting brackets.
- Overload, over-temperature, high-voltage, and low-voltage protection.
- Certified to UL 458 and CSA C22.2 No. 107.1-01 as stated by the manufacturer.
Verified specifications
| DC input | 12 V |
|---|---|
| AC output | 115 V ±5% |
| Continuous output | 1,500 W |
| Surge output | 3,000 W |
| Waveform | Modified sine wave |
| Low-voltage alarm / cutoff | 11.0 V / 10.5 V |
| Over-voltage protection | 15.0 VDC |
| UPC | 715535896478 |
Installation and load matching
Modified sine wave is not suitable for every appliance or electronic device. Confirm continuous and startup demand, battery capacity, DC cable gauge and length, fuse requirements, ventilation, grounding, and mounting clearance. Follow the Xantrex manual and applicable RV electrical codes.
Documentation
California Proposition 65 warning: This product can expose you to DINP, known to the State of California to cause cancer, and DIDP, known to cause reproductive harm. Visit P65Warnings.ca.gov.