Xantrex PROwatt SW600 540W True Sine Wave Inverter
Xantrex PROwatt SW600 540W True Sine Wave Inverter
Power sensitive 120-volt devices from a 12-volt battery bank with a compact true-sine-wave inverter. The Xantrex PROwatt SW600 model delivers 540 watts of continuous output and up to 1,200 watts of surge capacity—an important distinction for matching the unit to an appliance’s running and startup demand.
Key capabilities
- True sine wave output for a broad range of electronics and variable-speed loads.
- Built-in display shows DC voltage, AC output power, and error codes.
- One duplex GFCI receptacle and one USB Type-A charging port.
- Hardwire DC connection with heavy-duty terminals.
- Low/high-voltage, overload, over-temperature, and GFCI protection.
Verified electrical specifications
| Continuous output | 540 W |
|---|---|
| Peak surge | 1,200 W |
| DC input | 12 V nominal; 10.5–15.5 V operating range |
| AC output | 104–127 VAC; 60 ±0.5 Hz |
| Waveform | True sine wave |
| Optimum efficiency | 90% |
| Recommended DC fuse | 150 A |
| Dimensions | 3.5 × 8.7 × 12.2 in. |
| Weight | 6.5 lb. |
| UPC | 715535894061 |
Installation note
Size the battery bank, cables, fuse, ventilation, and grounding for the actual load and cable run. The “SW600” model name does not mean 600 watts continuous; the verified continuous rating is 540 watts. Installation should follow the Xantrex manual and applicable RV electrical requirements.
Documentation
California Proposition 65 warning: This product can expose you to DINP, known to the State of California to cause cancer, and DIDP, known to cause reproductive harm. Visit P65Warnings.ca.gov.