Xantrex PROwatt SW2000 1800W True Sine Wave Inverter
Xantrex PROwatt SW2000 1800W True Sine Wave Inverter
Run larger compatible 120-volt loads from a 12-volt battery system with true-sine-wave output suitable for a broad range of electronics and appliances. The Xantrex PROwatt SW2000 delivers 1,800 watts continuously with up to 3,000 watts of peak surge capacity.
Key capabilities
- True sine wave AC output.
- Built-in display for DC voltage, AC output power, and error codes.
- One duplex GFCI receptacle and one USB Type-A charging port.
- Hardwire DC connection with heavy-duty terminals.
- Low/high-voltage, overload, over-temperature, and GFCI protection.
- Meets UL 458 requirements stated by the manufacturer.
Verified electrical specifications
| Continuous output | 1,800 W |
|---|---|
| Peak surge | 3,000 W |
| DC input | 12 V nominal; 10.5–15.5 V operating range |
| AC output | 104–127 VAC; 60 ±0.5 Hz |
| Waveform | True sine wave |
| Optimum efficiency | 90% |
| Recommended DC fuse | 250 A |
| Dimensions | 3.9 × 11.8 × 13.7 in. |
| Weight | 10.7 lb. |
| UPC | 715535894221 |
Installation note
Large 12-volt inverter loads require substantial battery capacity, correctly sized short DC cables, and properly rated overcurrent protection. Confirm continuous and startup demand for every appliance and follow the Xantrex manual and applicable RV electrical codes.
Documentation
California Proposition 65 warning: This product can expose you to DINP, known to the State of California to cause cancer, and DIDP, known to cause reproductive harm. Visit P65Warnings.ca.gov.