Xantrex XPower 3000 2500W Modified Sine Wave Inverter with Remote
Xantrex XPower 3000 2500W Modified Sine Wave Inverter with Remote
Supply higher-demand compatible 115-volt loads from a 12-volt battery bank when shore power is unavailable. The Xantrex XPower 3000 model is verified at 2,500 watts of continuous modified-sine-wave output with up to 5,000 watts of surge capacity, plus two duplex GFCI receptacles and an included remote on/off switch.
Key capabilities
- 2,500 W continuous output with 5,000 W surge capacity.
- Two duplex GFCI receptacles.
- Included remote on/off switch.
- Hardwire DC connection with heavy-duty stud terminals and mounting brackets.
- Overload, over-temperature, high-voltage, and low-voltage protection.
- Certified to UL 458 and CSA C22.2 No. 107.1-01 as stated by the manufacturer.
Verified specifications
| DC input | 12 V |
|---|---|
| AC output | 115 V ±5% |
| Continuous output | 2,500 W |
| Surge output | 5,000 W |
| Waveform | Modified sine wave |
| Low-voltage alarm / cutoff | 11.0 V / 10.5 V |
| Over-voltage protection | 15.0 VDC |
| UPC | 715535896553 |
Installation and load matching
The “XPower 3000” model name does not mean 3,000 watts continuous; the verified continuous rating is 2,500 watts. This size of 12-volt inverter demands substantial battery capacity, short correctly sized DC cables, and properly rated overcurrent protection. Modified sine wave is not suitable for every device. Follow the Xantrex manual and applicable RV electrical codes.
Documentation
California Proposition 65 warning: This product can expose you to DINP, known to the State of California to cause cancer, and DIDP, known to cause reproductive harm. Visit P65Warnings.ca.gov.